Skip to content
Date: · 5 min

Choosing an intercom: analog vs IP vs Wi-Fi models

An intercom is a door station by the entrance and a monitor inside. But the type of link between them completely changes the system's cost, features and the amount of installation work.

Analog intercom

In an analog system the door station and monitor are joined by a simple cable and video and audio travel directly. It's inexpensive, needs no setup and often fits the existing wiring in older buildings.

The downside is limited features: you can't take the call on a phone, and visit records stay only in the monitor's memory.

IP intercom

An IP intercom runs over network cable and works like a small computer: it forwards calls to a phone through the Hik-Connect app, opens the door remotely, saves visit snapshots and shows CCTV cameras on the monitor.

If the building has an old two-wire line, there are two-wire IP kits as well — they let you move to a digital system without running new cable.

When a Wi-Fi monitor makes sense

If the monitor has to go in any room but running cable there is difficult, choose a model with a Wi-Fi monitor. The door station is still cabled; only the monitor goes wireless.

What a kit includes

  • Door station — at the door or gate; outdoors, in a protected housing.
  • Indoor monitor — one or several, for each floor or room.
  • Electric lock or strike — for remote opening, bought separately.
  • Power supply, plus a PoE switch for an IP system.

Frequently asked questions

With IP intercoms, yes: the monitor can also show the picture from Hikvision cameras. Analog systems usually can't do this.

Guides

Still have questions?

Leave your number — we'll give short advice for your site and work out the kit you need.