Skip to content
In stock

Hikvision DS-3WF1000-EI-2N(O-STD)2.4GHz 300Mbps 1km Wireless Bridge Kit

Also known as: DS-3WF1000-EI-2N

This two-device kit delivers up to 300 Mbit/s over distances of up to 1 km. In daily use, it lets cameras and remote equipment exchange video and data without running cable between buildings, while the IP55 rating keeps the units working in rain and dust. Tip: before ordering, confirm that the devices you plan to connect use 10/100 Mbit/s RJ45 ports and can be powered from Passive PoE, which simplifies pole mounting of the DS-3WF1000-EI-2N(O-STD).

2.4GHz 300Mbps 1km Wireless Bridge Kit

Description

Housing rated IP55, so it can be mounted outside, under eaves and in unheated storage rooms. Gets power through PoE, so a single cable is enough and no adapter or outlet is required.

Hikvision equipment store: authentic goods with warranty and documents. Dealers and project buyers can request wholesale prices.

Specifications

Product Dimensions (W × H × D)
90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)
256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight
0.26 kg (0.57 lb) per device
Gross Weight
0.9 kg (1.98 lb)
Packing List
Wireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1
Packing Method
Packing in pairs
Working Temperature
-30 °C to 60 °C (-22 °F to 140 °F)
Working Humidity
5% to 95% (no condensation)
Storage Temperature
-40 °C to 80 °C (-40 °F to 176 °F)
Storage Humidity
5% to 95% (no condensation)
Installation Mode
Pole Mounting
Ingress Protection
IP55
Power Consumption
1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W
Max. Transmission Rate Of Air Interface
≤ 300 Mbps
Wireless Standard
IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)
Working Frequency Band
2400 MHz ~ 2483.5 MHz
Antenna Gain
7 dBi
Antenna Angle
(H) Beamwidth [3 dB] 60°, (V) Beamwidth [3 dB] 50°
Transmitting Power
22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity
-87±2 dBm @HT40 MCS0
Throughput Rate
PTP: 90 Mbps/0.2 KM(HT40),90 Mbps/0.5 KM(HT40),70 Mbps/1 KM(HT40),PTMP(1 to 4): 40 Mbps/1 KM(HT40)
Network Interface
2 × 10/100 Mbps RJ45 ports
LED Indicator
Power indicator,LAN indicator,Signal intensity indicator
Reset
Hardware resetting button
Power Supply
12-24 VDC Passive PoE
Application Function
IFM,IPM
Channel Width
10/20/40 MHz
Channel Selection
Auto/manual selection
Security Mode
WPA2-PSK
Security Mechanism
Wireless network name hidden
Network Protocol
NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
Management Method
HCP,Web,iVMS-4200,HPP
System Log
Syslog,Control center information
Upgrade
Web,iVMS-4200,HCP,HPP
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning
EMC
CE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3)
Safety
CB (IEC 62368-1),CE-LVD (EN 62368-1)
Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Radio
EN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN 300 328, EN IEC 62311

The figures are taken from Hikvision's own and other vendors' documentation, and might change once models are revised.

Delivery and payment

  • Toshkent: omborda bor tovarlar o'sha kuni, odatda bir soat ichida
  • Regions: courier delivery in 1–3 days
  • Ways to pay — cash, Uzcard, Humo, Click, Payme, or in parts

Frequently asked questions