Skip to content
In stock

Hikvision DS-3WF0BC-2NT(B)2.4Ghz 300Mbps 200m Elevator

Also known as: DS-3WF0BC-2NT

The Hikvision DS-3WF0BC-2NT(B) wireless bridge carries a signal up to 200 m, so a camera inside an elevator shaft can reach the building network without running cable through the shaft. Its RJ45 port at 100 Mbps connects a camera or other device, and passive PoE powers it from 12–24 V DC. Before buying, check that your power supply voltage and the connected camera's requirements match the bridge's specifications.

2.4Ghz 300Mbps 200m Elevator

Description

Housing rated IP55, so it can be mounted outside, under eaves and in unheated storage rooms. Gets power through PoE, so a single cable is enough and no adapter or outlet is required.

Hikvision equipment store: authentic goods with warranty and documents. Dealers and project buyers can request wholesale prices.

Specifications

Product Dimensions (W × H × D)
90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'')
Package Dimensions (W × H × D)
256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
Net Weight
0.26 kg (0.57 lb) per device
Gross Weight
0.8 kg (1.76 lb)
Packing List
Wireless Bridge × 2,Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2,Binding Tape × 4,Quick Start Guide ×1
Packing Method
Packing in pairs
Working Temperature
-30 °C to 70 °C (-22 °F to 158 °F)
Working Humidity
5% to 95% (no condensation)
Storage Temperature
-40 °C to 80 °C (-40 °F to 176 °F)
Storage Humidity
5% to 95% (no condensation)
Installation Mode
Pole Mounting
Ingress Protection
IP55
Power Consumption
1.89 W for typical (1-ch 2MP IPC), Max. 3.7 W
Max. Transmission Rate Of Air Interface
≤ 300 Mbps
Wireless Standard
IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)
Working Frequency Band
2400 MHz ~ 2483.5 MHz
Antenna Gain
7 dBi
Antenna Angle
(H) Beamwidth [3 dB] 65° (V) Beamwidth [3 dB] 65°
Transmitting Power
23 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity
-87±2 dBm @HT40 MCS0
Throughput Rate
PTP: ,30 Mbps/0.2 KM(HT40)
Network Interface
2 × 10/100 Mbps RJ45 ports
LED Indicator
Power indicator,LAN indicator,Signal intensity indicator
Reset
Hardware resetting button
Power Supply
12-24 VDC Passive PoE
Application Function
IFM,IPM
Channel Width
10/20/40 MHz
Channel Selection
Auto/manual selection
Security Mode
WPA2-PSK
Security Mechanism
Wireless network name hidden
Network Protocol
NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
Management Method
HCP,iVMS-4200,Web,HPP
System Log
Syslog,Control center information
Upgrade
Web,iVMS-4200,HCP,HPP
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Safety
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Radio
EN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17

The figures are taken from Hikvision's own and other vendors' documentation, and might change once models are revised.

Delivery and payment

  • Toshkent: omborda bor tovarlar o'sha kuni, odatda bir soat ichida
  • Regions: courier delivery in 1–3 days
  • Ways to pay — cash, Uzcard, Humo, Click, Payme, or in parts

Frequently asked questions

Similar products

All Wi-Fi bridges →